Sivoia QS Shades.html

gacor

Hardware Generations

  • Sivoia QS Shades released an updated 2nd generation hardware revision in mid-2019. Gen 2.0 is intended to match the behavior of Gen 1.0with slight differences to blink codes described below.
  • The Gen 1.0 and Gen 2.0 hardware versions can most easily be distinguished by asking the question "What comes after red during the power-up blink code?"As seen in the first blink code below, if the answer is "Green", then the shade is Gen 1.0, while if the answer is "Blue", then the shade is Gen 2.0.
  • There are other ways to tell these shades apart, please contact Lutron Technical Support if you need further assistance.

Normal Operation

Double-tap the Open Limit button to send the EDU to its open limit, or double-tap the Close Limit button to send the EDU to its close limit.

Setting Limits

Assignment Mode

Description - Assignment Mode is used to assign devices on the system, such as shades, to listen to control units in the system, such as keypads.

HOW TO ENTER: Assignment mode can usually be entered by pressing and holding the Open and Close buttons on a controlling device for 5s, but refer to the instruction sheet for the device being used for specific details.
HOW TO EXIT: Refer to the instruction sheet of the control device being used.

Link Diagnostics Mode

  • Link Diagnostics mode is used to verify all communications links are wired correctly.
  • Link Diagnostics mode can be entered from the buttons of any QS shade or any QS power panel.
  • Link Diagnostics mode will automatically timeout after 10 minutes if not exited from the buttons.

Return to Defaults

"Method 1" will work for all shades, while "Method 2" will only work for Gen 2.0 shades that show the updated startup blink code shown above. Note: Returning an EDU to its default settings ("out-of-box") will NOT affect the EDU's limits.

Method 1: "4 Button Method" (Gen 1.0 & Gen 2.0)

Method 2: "Triple-Tap-Hold-Triple-Tap" (Gen 2.0 Only)

Firmware Upgrade

Fault Conditions

Log Extraction

ncG1vNJzZmivlZeusbXAsGipqp%2BZsaLAj2qqrWhhY6%2Btu8FnmqiqlWPEqrrDqK6sZp6awXCt0qycratfmbykwcyepa2rX4i2t7vImlxraIGIcnN8sqGYnZ2jY7W1ucs%3D